Shipping Package Length: 50"
Dear International Buyers!
Before making a purchase, Please checkMaximum Allowed Size for Mails to your country.
Dear International Buyers!
Before making a purchase, Please check
Daiwa MINIBOAT V 30-330 Inter-line rod 11ft 7:3 action lightweight sensitive flexible
Linear Interline guide structure with the line runs inside the blank, is integrated inside the blank, the blanks true action is optimized, no tangles, no guide breakages, even line control with convenient no tangling storage. Line is distributed evenly along the entire spiral structure, decreasing torque, providing smoother retrieves, friction free casting and ultra smooth drag pressure. Decreasing line contact and drag thus increasing cast distance and accuracy by drawing water off the line and keeping the line centred in the rod. By increasing the amount of spirals and deceasing the spiral peak, interline rods have become inherently more sensitive.
7:3 action combined with the operability and superior sensitivity make this rod suitble for all weather conditions espeicially windy or rainy. Slim designed and lightweight rod has the power and tone balanced to stable and usable for any species including Horse Mackerel, Rockfish, Root Fish, Thailand, Grunt, Cutlass, Kiss Flounder, Squid, Largemouth Bass, Northern Pike, Rainbow Trout, Steelhead, Bull Trout, Striped Bass, Redfish, Chopper Blues, and many other marine and freshwater game fish.
DAIWA MINIBOAT V 30-330
- 7:3 Medium action
High density HVF carbon: 64% - Telescopic sections: 3
Total length: 3.3m / 11ft Folded length: 117cm / 3.9ft Total weight: 185g / 6.5oz Tip diameter Outer:2.2mm | Internal:1.5mm - Butt diameter: 22mm
Suitable Casting weight: 20-40g / 0.5-1.4oz - Suitable lines and knots: Braid, PE lines, mono leader knots
- V grip sheet
Stepping under yarn prevention stopper Removable lightweight resin top guide Soft cotton rod bag and plastic case - Line goes inside through the guides located inside the rod
- Suitable lines and knots: Braid, PE lines and Mono leader knots
- Top cover to protect closed rod, remove it to extend rod
- Screw grip cap (helpful for rod maintenance)
- Line goes inside the rod through guides
- Suitable lines and knots: Braid, PE lines and Mono leader knots
- Top cover to protect collapsed rod, remove to extend rod
- Screw grip cap (helpful for rod maintenance)
Daiwa rod technology used in MINIBOAT V 30-330 to maximize the benefits of linear interline fishing method
Removable lightweight resin top guide.
Removable top guide helps easy to maintenance top guide, to adhere most dirt that difficult to remove, such as jellyfish, plankton, seaweed, etc...
Entrance [Guide].
It works without having to damage the thread in both when it is reduced, when the guide oval attached to the rod body, two of the guide round of introductory part, but acts as entrance guide, stretched out their pole.
Stepping under yarn prevention stopper.
Under plug which arranged the guide sticks to the bottom of the in the section (section just above the base rod to go inside when folded pole), together with the yarn Garni prevention mechanism that is applied to the lower plug further, can shorten pole to prevent yarn folded under stopper was near when is hurt. At the same time, to prevent scratching of the thread rod storage.
V grip seat.
18mm diameter, lightweight and slender, original reel seat shape that fatigue is familiar with the hand. You can handle comfortably in hand throughout the day. New grip with excellent hold characteristics Pamingu-operability.
The Linear Interline structure.
The linear structure refers to the structure material, inner surface becomes spiral. The structure allows line runs inside the rod blank instead of guideswhich reduce the stickiness. In addition, because it does not strung film of water between the inside lines and release of smooth yarn is possible. Decreasing line contact and drag thus increasing cast distance and accuracy by drawing water off the line and keeping the line centred in the rod.
Easy operation.
The line go inside through the guides located inside the rods. The rods is special designed With carbon thread inside to make sure the line go smoothly and will not touch the rods side tightly. Ensure the line will not scratch with the rods. The steel wire is for help the line go inside.
1. Mount reel, extend the tip section with guide.
2. One looped side connect with the line and another site insert into the rods guide.
3. Pull wire straight through the tip top and when the fishing line go out of the tip guide disconnect the line and the wire. Store the wire for future use.
As well as convenience of threading, this is one of the technology of Daiwa can realize the ideal of tone in a compact put away.
Interline Technology
Smooth bending curve - Interline rods bend evenly, no stress points provides maximum blank strength, unlike guided rods which create an uneven segmented curve with high stress points.360 degree axially symmetric tip - completely tangle free and provides equal performance at any angle, standard tip guides tangle easily and to get full performance they must be used at the same direction as the line.
No external weight - normal guides add weight, thus the action of the blank is degraded, Interlines guide structure is integrated inside the blank, and no external weight means the blanks true action is achieved.
Torque free - the line is located inside the blank, no guides to provide torque stress points, with many contact points torque and friction is reduced, normal external guides create high friction and torque reducing the life of the blank.
Linear Interline raised spirals - line is distributed evenly along the entire spiral structure, providing smoother retrieves and ultra smooth drag pressure.
No guides - no tangles, no guide breakages, even line control with convenient no tangling storage.
Extremely high sensitivity - with up to 200 linear contact points directly onto highly sensitive carbon, Interlines are inherently more sensitive compared to standard rods, guides are made of materials that absorb vibration "dulling" line sensitivity.
No slack line - standard guided rods can have up to 30 cm's of slack line due to the segmented guide distribution whereas interline provides completely even line distribution, even the subtlest of bites are felt and strikes are instantaneous.
Back to top
Always take a good care of your rod.
- Do not use any substitute materials or wire instead of wire designed to operate with this rod.
- Do not kink, bend abruptly or otherwise abuse the threading wire. It could damage the rod.
- Always use the recommended knots for connecting leaders.
- Do not brush inside; this may damage the inside of the rod.
- Accumulated water can be removed by whipping the rod.
- After use rinse out the inside and exterior of the rod with freshwater and whip the rod to remove excess water. Allow to dry before storage.
- Do not apply oil or lubricant to the inside of the rod as this will impedeline flow.
- Never lift your catch.
- Always open and close telescopic rod with a special care.
Back to top
Interline rods are highly suited to braid and PE lines, these lines require monofilament leaders and thus leader knots. For optimal performance Interline knots require ultra slim knots for easy line flow. Common leader knots like Twisted Leader Knots and Double Uni's are sufficient but the PE Leader Connection knot for connecting leaders to braided lines for maximum interline performance is suited best. For maximum knot strength apply a quick dry super glue to the knot.
Be careful
- Knots are unnecessary and may interfere with smooth threading.
- If resistance occurs do not force through. Simply remove and start again.
- Tip section has small diameter and leader knots can get entrapped inside the blank. For larger leaders keep the leader knot outside the blank.
- Entrapped knots or line can damage the tip section.
Back to top
