|
|
17.5ft telescopic extremely powerful Inter-line rod "PRESSA DRY 3-53HR-F" made of 98% High density HVF carbon manufactured by Daiwa
5.25 meters Daiwa InterLine rod PRESSA DRY 3-53HR-F is an expedition model to demonstrate the power of the big game island fishing. It has an excellent High-level capabilities (far throw 1-3 section) Mochiomori with few feelings in the low center of gravity design. Rod designed with the latest revolutionary technology utilize the incredible High volume fibre carbon, produce a fine diameter blank that resists twisting, eliminating blank stress, creating better casting accuracy, smoother drag pressure and greater hook setting power. It is equipped with super water-repellent inner dry processing, contact angle of water droplets and the object 165 degrees of surprise. Rod is very sencitive and flexible, it can be used to smooth (5g or so) delicate light and float mechanism.
The guideless blank allows for longer casts, superior action and the strength to overtake hard-fighting species. The reel seat is located closer to the bottom which makes the perfect balance. Rod bends evenly, no stress points provides maximum blank strength, it has 360 degree axially symmetric completely tangle free tip which provides equal performance at any angle. Linear Interline guide structure with the line runs inside the blank, is integrated inside the blank, the blanks true action is optimized, no tangles, no guide breakages, even line control with convenient no tangling storage.
Line is distributed evenly along the entire spiral structure, decreasing torque, providing smoother retrieves, friction free casting and ultra smooth drag pressure. Decreasing line contact and drag thus increasing cast distance and accuracy by drawing water off the line and keeping the line centred in the rod. By increasing the amount of spirals and deceasing the spiral peak, interline rods have become inherently more sensitive.
The advantage of using this rod is to eliminate the tangles to guide, feel more relaxing. being able to have a comfortable fishing with little trouble from the shore or beach. Tough specifications that show power for fishing expedition to the island greens amberjack, such as white-eye from over 60cm of tail Gree,
Striped Bass,
Fluke,
Large Porgy,
Black Sea Bass,
Tautog / Blackfish,
Salmon,
Steelhead Trout,
Bull Trout,
Northern Pike, redfish or chopper blues, and many other game fish.
Inter-PRESSA-DRY-3-53HR-F-DAIWA
98% High density HVF carbon
Telescopic Sections: 5
Total length: 5.25m / 17.5ft
Folded length: 114cm / 3.8ft
Total weight: 283g / 9.9oz
Tip Outer diameter: 3.0mm
Tip Internal diameter: 2.10mm.
Butt diameter: 25.0mm
Suitable Casting weight: 5-10gou (18.75-37.5g)
Suitable hook link diameter: 0.285-0.435
Suitable monofilament line diameter: 0.285-0.435
Suitable braided line: 2-5 (about 10-25kgs)
Suitable Float Stopper Nylon line diameter: < 0.235
Super water-repellent inner dry processing
Advancing mechanism with seat plate (HR Daiwa original pipe sheet)
One shot threading mechanism
SiC top guide
Screw butt cap
Rod bag and plastic case.
|
Out of stock
|
Daiwa rod technology to support the linear interline fishing method
Removable SiC top guide.
|
Removable top guide helps easy to maintenance top guide, to adhere most dirt that difficult to remove, such as jellyfish, plankton, seaweed, etc...
|
one shot threading mechanism.
|
Threading is smooth.
|
Reel DPS (pipe seet).
|
Fukase type advance mechanism with DPS (pipe seet).
|
Grip end.
|
Leather satin finish non-slip grip.
|
super water-repellent dry.
|
Water droplets contact blank at 165 degrees angle. Dropping the water to the water-repellent surface is rejected even the water droplets are scattered informal small. Out of the concept of playing the water longer, water-repellent performance of high level water droplets do not touch little inner rod. It is possible even droplets's combined linear structure and the water repellency were repelled from the rod inner surface together with the line by "superhydrophobic dry" (by drawing water off the line) it is discharged at once, the long cast smoothly even loading of about 5g.
|
Back to top
Interline Technology
Smooth bending curve � Interline rods bend evenly, no stress points provides maximum blank strength, unlike guided rods which create an uneven segmented curve with high stress points.
360 degree axially symmetric tip - completely tangle free and provides equal performance at any angle, standard tip guides tangle easily and to get full performance they must be used at the same direction as the line.
No external weight � normal guides add weight, thus the action of the blank is degraded, Interlines guide structure is integrated inside the blank, and no external weight means the blanks true action is achieved.
Torque free � the line is located inside the blank, no guides to provide torque stress points, with many contact points torque and friction is reduced, normal external guides create high friction and torque reducing the life of the blank.
Linear Interline raised spirals - line is distributed evenly along the entire spiral structure, providing smoother retrieves and ultra smooth drag pressure.
No guides - no tangles, no guide breakages, even line control with convenient no tangling storage.
Extremely high sensitivity � with up to 200 linear contact points directly onto highly sensitive carbon, Interlines are inherently more sensitive compared to standard rods, guides are made of materials that absorb vibration �dulling� line sensitivity.
No slack line � standard guided rods can have up to 30 cm�s of slack line due to the segmented guide distribution whereas interline provides completely even line distribution, even the subtlest of bites are felt and strikes are instantaneous.
Back to top
Take a good care of your rod.
|
Do not use any substitute materials or wire instead of wire designed to operate with this rod.
Do not kink, bend abruptly or otherwise abuse the threading wire. It could damage the rod.
Always use the recommended knots for connecting leaders.
Do not brush inside; this may damage the inside of the rod.
Accumulated water can be removed by whipping the rod.
After use rinse out the inside with freshwater and whip the rod to remove excess water. Allow to dry before storage.
Do not apply oil or lubricant to the inside of the rod as this will impedeline flow.
Washed the exterior of the rod with freshwater after use.
|
|
Interline rods are highly suited to braid and PE lines, these lines require monofilament leaders and thus leader knots. For optimal performance Interline knots require ultra slim knots for easy line flow. Common leader knots like Twisted Leader Knots and Double Uni�s are sufficient but the PE Leader Connection knot for connecting leaders to braided lines for maximum interline performance is suited best. For maximum knot strength apply a quick dry super glue to the knot.
Be careful
- Knots are unnecessary and may interfere with smooth threading.
- If resistance occurs do not force through. Simply remove and start again.
- The tip section has small diameter and leader knots can get entrapped inside the blank. For larger leaders keep the leader knot outside the blank.
- Entrapped knots or line can damage the tip section.
|
|
Also recommended with this item:
Back to top
|
|
|
